0899969327
bg en 

Решения за филтрация

Recommended Filtration Solutions

Perfect Pleat®ISO Coarse 70%

PREFILTER

  • Low initial resistance
  • 100% synthetic high-loft media
  • Highest performing self-supported pleat
  • Consistent media with controlled fiber size and blend
  • Mechanical efficiency –does not rely on electret charge technology
  • Antimicrobial available

DriPak®GX ePM10 60-75% / M5

PREFILTER

  • 3x higher efficiency on 0.3-1μm particles as-compared to ISO Coarse / G3 filters
  • 2x more efficient on 1-3μm particles as-compared to ISO Coarse / G4 filters
  • Increaselife time of downstream final filters
  • Significantly improve protection from bioaerosol hazards
  • ePM10 60-75% / M5

DriPak®NX ePM1 60-85% / F7-F9

PREFILTER OR SECONDARY FILTER

  • Highest media amount of small particle efficiency layer in a pocket filter
  • Low initial resistance
  • 100% synthetic media
  • Available in ISO ePM1 60-85 % efficiencies

VariCel®VXL(E)

SECONDARY FILTER

  • 50% more media area (VXLE version) provides greater airflow capacity and lowers resistance
  • Maximum dust-holding capacity extends filter life, minimizing operating costs
  • Higher overall particle efficiency as compared to pocket filters with similar ISO ratings
  • Excellent performance in difficult operating conditions
  • Can be used in high-velocity systems, operating at up to 3,8 m/s
  • Fiberglass media increases in efficiency over the filter’s life, will not decrease due to loss of charge
  • Available in ISO ePM2.5 and ePM1 efficiencies

VariCel®V XLH

SECONDARY FILTER

  • Increased protection against the transmissionof airborne diseases
  • High filtration efficiency –up to EPA filtration class E10
  • Minimum 95% efficient on 0.3μm
  • Repellent media arranged in vertical pleats to maximize drainage of moisture and ensure maximum efficiency
  • Faceguards on the downstream side provide increased stability and robustness

MEGAcel® I eFRM

HEPA FILTER

  • Expanded fluororesinmembrane (eFRM) media offers up to 50% lower resistance than glass media
  • 8X stronger than glass media
  • Highly resistant to corrosive environments (acids, alkalis, and organic substances)
  • Lowest off-gassing properties available
  • Withstands pressure up to 5,000 Pa
  • 99.95% and 99.995% at MPPS, H13 and H14
  • Compatible with all common test methods, including high-concentrationoil-based aerosol testing with PAO.
  • Available in ISO ePM2.5 and ePM1 efficiencies
  • Antimicrobial available

AstroDuct HEPA

INLINE DUCTHEPA HOUSINGS

Features and Benefits

  • Filter housing for HEPA filters with 292 length
  • Made of Aluzinc
  • Thickness of insulation: 50 mm
  • Door hinged on the left or right
  • For multiple filters: aluminum profile construction

Applications

  • Intended for regular airflow in commercial, industrial and institutional applications
  • Pre-or final filtration in general air handling units
  • Pre-filtration for critical cleanroom applications
  • Upgrading of existing systems for better indoor climate and energy efficiency

AstroSafe SC1000

Bag In/Bag Out Containment System

  • Safe, reliable method for removingcontaminated particlesin hazardous environments
  • Turn-key solution forcontainment of bacteria and viruses
  • Maintenance personnel are protected from direct contact with hazardous contaminants
  • Self-contained unit includes HEPA filter, prefilter, Bag In/Bag Out system, Isolation Damper, Base, Exhaust Stack

Protective Equipment

THERE IS AND ALWAYS WAS A RISK WHEN REPLACING POTENTIALLY
CONTAMINATED FILTERS.

Not only with regards to the current discussion on the coronavirus we ALWAYS RECOMMEND suitable protection when changing out dust loaded filters.